Summary:
This video is about common mistakes that new woodworkers make when using a table saw [1]. The video is made by Sumeray Builds [1].
The video starts with listing 3 DIY upgrades that can be made using a table saw and a few basic tools [1]. These upgrades include a cross cut sled, a zero clearance insert, and a router table attachment [1].
Next, the video dives into the 8 mistakes that new woodworkers tend to make [1]:
Not making DIY upgrades: The video argues that these upgrades are useful and easy to make [1].
Cutting with the blade too high: The video says that the blade should only sit slightly above the board being cut (1 or 2 mm) [1].
Cutting a thick piece of wood into thin strips with the fence too close to the blade: The video recommends using a miter gauge and a scrap piece of wood as a sacrificial fence to avoid kickback [1].
Cutting freehand: The video discourages cutting freehand because it is unsafe [1].
Not using the correct blade: A fine wood blade is recommended for less tear out and a nicer finish [1].
Not being familiar with the table saw: The video advises learning how a good cut sounds and feels like [1].
Not using push sticks: The video recommends using two push sticks to keep fingers away from the blade and to apply pressure to the wood [1].
Not calibrating the saw: The video says that the saw needs to be calibrated to ensure accurate cuts. Every 6 months is recommended for recalibration [1].