Summary:
This video is about two table saw fences, a tall fence and a horizontal fence, that you can make yourself. The tall fence is 12 inches high, while the horizontal fence can be adjusted from 6 to 12 inches. The fences attach to your regular table saw fence and can be used for a variety of purposes, such as cutting a board on edge, making a slot in the end or edge of a board, turning a board into a raised panel, making long thin tapers, making odd angles, reproducing odd shapes, and making convex curves.
The video also includes safety tips, such as not letting debris accumulate underneath the fence and sending the stock straight through the saw without turning it until the excess is smaller than the width of the saw blade.
The plans for the fences are available on the Workshop Companion store.
